Best Temperature to Install Shingles in Minnesota
For my roofing projects, 50–80°F is a preferred working range when the roof is dry and conditions are suitable. At 90°F and above, I pay closer attention to heat and how the shingles are being handled. Those are my field preferences. The instructions for the exact shingle still govern the installation.
There is more to a good roofing day than the afternoon high. Shingle temperature, sunlight, wind, moisture and the conditions after installation also matter.
Why mild weather is a good opportunity
A mild fall day can give us a useful window for a roof replacement. It is an opportunity to consider the whole job: handling the material, working on a dry surface, following the installation instructions and planning for the shingles to seal.
We look at the actual conditions on the roof and the forecast before choosing how to proceed. A 50–80°F forecast does not automatically make every hour suitable, and a temperature outside that range does not automatically rule out a properly planned installation.
Cold weather: handling and sealing need attention
Malarkey’s October 2024 cold-weather bulletin addresses installation below 40°F. It explains:
“Because shingles become stiffer in cold weather, let them warm in the sun prior to application.”
The bulletin also says not to install cracked shingles and discusses warming materials, working in sunlight and hand-sealing when adverse conditions interfere with the factory sealant. It warns that frost and ice must not be present on the walking surface. Malarkey cold-weather bulletin
Owens Corning’s April 2026 bulletin covers air and surface temperatures at or below 40°F. It states:
“Shingles installed in cold weather may not immediately seal until warmer temperatures are present for the sealant to activate.”
Its current recommendations include hand-sealing shingles along the entire roof perimeter, along with other cold-weather installation details. The exact product instructions and current bulletin should be read together. Owens Corning cold-weather bulletin, April 2026
Cold-weather installation can be possible with suitable conditions and the right procedures. That does not mean shingles should be installed in any weather. Ask how the contractor will handle the material and address sealing if the roof stays cold.
Hot weather: watch foot traffic and tools
Malarkey’s hot-weather bulletin explains that heated shingles become more pliable. It advises careful foot movement and footwear to reduce scuffing, avoiding cutting over installed materials, and adjusting pneumatic nailers as conditions change. One useful warning is:
“Elevated temperatures soften asphalt shingles and make it easier to overdrive fasteners.”
Malarkey hot-weather bulletin, June 2019
That is why 90°F+ is my heat caution range. It is a prompt to look carefully at the roof surface, material handling and work sequence, rather than a universal manufacturer maximum. A sunny roof can require attention even when the air temperature is lower.
Air temperature is only part of the story
Malarkey’s technical FAQ explains that sun, cloud cover, roof direction, slope, wind and shingle color affect sealing. A sunny 50-degree day and a cloudy 50-degree day can behave differently. Malarkey technical FAQ
Attaching the shingles and getting their seal strips to bond are related but separate parts of the installation. The useful homeowner question is: “What is your plan for these shingles in the conditions we actually have?”
October 12 weather check: a promising fall roofing window
Temperature-wise, the next two weeks look phenomenal for fall roofing. The Cottage Grove outlook checked October 12 shows many afternoon highs in the 50s and 60s after today’s warmer conditions. That fits comfortably within my preferred working range. Cottage Grove October 2026 forecast
The extended outlook also includes possible showers, breezy periods and some chilly overnight lows. We still check the nearer-term forecast and the actual roof before working. This is a promising planning window, not a promise of fourteen dry roofing days.
Ask these questions before scheduling
- Which exact shingles and installation instructions apply to my roof?
- How will the crew adjust for the temperature on the roof?
- What is the plan if the factory sealant does not activate promptly?
- What weather or roof conditions would cause the work to pause?
Northern Exteriors MN Inc. is family-owned and based in Cottage Grove, serving Twin Cities homeowners since 2001. If you are weighing a roof replacement in Cottage Grove, Woodbury, Hastings or Inver Grove Heights, start with a clear assessment and an explanation of your options.
Explore our Twin Cities roofing services or request a free roofing inspection. Call 651-230-5103. MN License #BC297099.





